Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Hydration

Problem Solvers Bottle Cage Height Adapter
$9.99
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
Topeak Modula Java Cage
$15.95
Topeak's Modula Java Cage carries your 12 or 16 ounce coffee cup with ease, so you can bring your favorite hot beverage along for the ride. It grabs securely with a rubber strap and adjusts to fit most insulated mugs.
Zipp Vuka BTA Carbon Bottle Cage
$81.00
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
Specialized Shiv Fuelselage Hydration System
$35.00
Designed to be used with the revolutionary Shiv, the Fuelselage is the ultimate integrated hydration system. - Available in two sizes: 0932-1001 fits X-Small/Small Shiv frames 0932-1003 fits Medium/Large/X-Large Shiv frames
Specialized Rib Cage II
$25.00
The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts EMT Cage Mount MTB or Road Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 33g
Specialized Rib Cage II
$25.00 - $35.00
The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount Road or MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 33g
Specialized Rib Cage II
$25.00
The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts EMT Cage Mount MTB or Road Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 33g
Specialized Direct Mount Reserve Rack
$25.00
Hydration on the road is critical, and the Direct Mount Reserve Rack helps ensure that you have adequate supplies of H2O or your liquid nutrition of choice right there when you need it. This simple water-storage solution holds up to two water bottles, provides a sleek and aero profile, and mounts easily under any SWAT-compatible saddle. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts. - Holds up to two water bottles behind the saddle for a more aerodynamic profile.
Surly Silicone Pint Glass
$16.00
Our Silicone Pint Glass is one such vessel that allows you to keep your colds cold and your hots hot. Plus, it’s virtually indestructible.
BiKASE Happy Can
$24.99
The Happy Can from BiKASE is a convenient handlebar/stem mounted drink holder or general purpose stash sack. Using a few hook and loop straps, the Happy Can mounts between your handlebar and stem so you have easy access to your beverage or other items. - easily connects to handlebars and stem using 2 Velcro straps - securely fits cycling water bottle or other bottle sizes - perfect to use as a small storage bag for snacks or phone - mesh side pocket - rain fly with draw string to secure water bottle on bumpy rides
Specialized Sitero Wing
$10.00
Specialized's Sitero Wing is the best way to carry water and inflation tools without compromising aerodynamics. Designed specifically for the Specialized Sitero saddle (sold separately), this handy accessory can be used with or without a bottle cage and holds a mini road pump and two CO2 canisters.
XLAB Torpedo System 50+
$54.95
Torpedo System 50+ is the perfect refillable aerobar hydration system for the beginner triathlete. Unbeatable price + top features outshine any competitive choice. Includes: - Bottle and Bottle Accessories: Bottle, Straw with Bite Valve, Slotted Lid, Spare Straw Hole Plug - Nylon Composite Vee Cage - Aluminum Torpedo Mini Mount - Mounting Accessories: (4) XTS Mounting Straps Easy to Ride - Stop reaching down to frame bottles for a drink. Keep both hands on the aerobars and simply take a drink from a straw positioned directly under your mouth. Easy to Drink & Refill - 2 possible straw locations to customize your setup - Drink Valve makes drinking even faster by keeping fluid ready near top of straw. - Split Refill Lid allows for easy refilling while on-the-go. Wide diameter allows for on-course Aid Station Bottles for easy mid-race refills. - No lid to flip out of the way, just simply put the full bottle into the easy access split refill hole. Easy to Clean - One-piece body ensures no leaking! - Bottle made in the USA and is lead free, BPA-Free and HDPE food safe certified - TRUE 26 oz bottle capacity (768 mL) Quick Install - Adjustment width fits bars 80mm – 130mm (center-to-center) - No tools required for fast installation and removal. Simply loop straps around aerobar extensions and tighten. Easier to Handle in Winds - Bottle designed to mount further back allowing easier steering for the rider No Need to Sacrifice Aerodynamics Even at the Entry-Level - Aerodynamically Invisible bottle design used by all XLAB Torpedo Systems - Contoured design to fit your arm shape. - Small frontal area that allows a clean airflow around the bottle - Kamm tail. Reduces drag by 50% - Airflow straighteners designed into the bottle to gather airflow for a clean, straight exit air flow
FuelBelt Fuel Loops
$4.99
- Customize your race belt with this lightweight slide on accessory - Holds up to four gel packs - Compatible with all Ergo & Ultralight Belts
XLAB Raptor Talon Pair
$5.95
Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!
BiKASE Bottle Cages
$15.99
The Bottle Cage from BiKASE offers you the adjustability of mounting directly to the braze-ons which are attached to your bike. The cage is made from engineered resins and holds a water bottle in place when you are riding over bumps. It’s perfectly suitable for mountain biking because it keeps your liquids safe. Your bottle will always stay secure when using this product. - The cage fits a standard size cycling water bottle.
Portland Design Works Bar-ista Coffee Cup Holder
$18.00
Sometimes you don't want to leave your cup of joe at home. Enter: Portland Design Works' Bar-ista to keep your morning beverage within easy reach. This handy accessory fits most travel mugs and attaches to 26.0mm handlebars. Drop in your travel mug (with a good lid to avoid splash stains) and enjoy the ride. - Constructed of 5052 alloy and lined with rubber to better grip travel mugs - Weight: 71g (2.5 ounces) - Dimensions: 8cm (3.125") diameter at top, tapering to 7.5cm (2.95") at bottom - Lifetime PDWarranty
Topeak Tri-Backup Pro V
$55.95
Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams
Cruiser Candy Bling Bicycle Drink Holder
$24.99
Add sparkling personality to your ride with these bling drink holders! - Give your ride your own personal flair while having a great drink holder - Can hold wallet, phone, keys, sunglasses as well as your favorite beverage - Easy to install on your handlebars with one screw - Many varieties available
Fox Racing Utility Hydration Pack - Small
$99.95
On quick rides, the Utility Hydration Pack - Small, provides a minimal storage solution for hydration and essential riding gear. - 2L HydraPak reservoir - Fleece-lined pockets for valuables - 7.5L storage capacity - Key clip - Magnetic hose retention - Reflective trim - Removable waist strap - Helmet loop secure helmet while not in use - 450D polyester diamond ripstop TPU face
Cruiser Candy Tiki Cute Cup Bicycle Drink Holder
$24.99
This super cute tiki bicycle drink holder fits most bike handlebars. Features bamboo siding and floral lei that will be a perfect addition to your bike or beach cruiser. - Give your ride your own personal flair while having a great drink holder - Can hold wallet, phone, keys, sunglasses as well as your favorite beverage - Easy to install on your handlebars with one screw - Cute artificial flowers adorn the top
Elite Custom Race Plus
$20.99
The new design of the Custom Race Plus bottle cage streamlines the bottle for easier handling and improves bottle cage insertion/removal. - Painted with Fiber-reinforced (FRP) construction - Adjustable elastomer rubber shim - The choice of the world’s best Pro Teams
Topeak Modula Cage II
$15.00
Topeak's Modula II is a sleek bottle cage capable of handling bicycle water bottles and small mineral water or sports drink bottles. So go ahead and buy that sports drink! Now it will fit in your bottle cage.
Fabric Gripper Bottle
$8.99 - $9.99
Get to grips with your thirst, with the innovative Gripper bottle. The unique non-slip surface gives you maximum grasp, whatever the weather. The bottle is BPA free and features Fabric's high-flow valve and silicone mouthpiece. - Unique textured surface - Soft squeezable body - Silicone mouthpiece - BPA free
Fabric Bottle
$20.00
Fabric's revolutionary cageless water bottle completely does away with the need for a bottle cage by mounting directly to your frame. The ultralight-weight 1.5g studs are secure, remove unnecessary parts and improve the clean lines of your bike. Ultra lightweight bottle & mount system -The cageless water bottle slots on to lightweight mounts (1.5g each) that are secured to standard water bottle bosses. The bottle is held securely to the mounts, yet removed easily when needed. Inexpensive all in 1 solution -Featuring a high quality BPA free bottle and 2 sets of mounts for use on multiple bikes, the Fabric Waterbottle provides a complete solution for the price of a standard bottle. No more ugly cage -Rarely does a cage improve the aesthetic of a bike. When the Fabric Waterbottle is removed the clean lines of the bike are restored. -Comes complete with two direct mounting studs. -BPA Free
Sunlite Composite Cage
$3.99
• Composite construction • Fits standard bottles
Specialized Roll Cage
$15.00
The Roll Cage is a durable, stamped aluminum water bottle cage that's compatible with SWAT accessories for tool and storage integration. It also features a unique left-, right-, and center-mounting design that allows you to easily manage bottles when space on the frame is limited. - SWAT technology design allows for storage and tool integration. - Three mounting positions allow easy in-and-out bottle accessibility from the left, right, or center position. - Cage can be rotated to alternate positions after installation. - Accepts EMT Cage Mount Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 50g
Minoura SBH-300 Saddle Mount Bottle Cage Holder
$19.99
The Minoura SBH-300 Saddle Water Bottle Cage Mount for 2 Cages attaches behind your saddle to hold two extra water bottle cages or one extra bottle cage and one spare tube set. It is lightweight at only 135 grams, and is in a good position for aerodynamics. All bottle cage screws are included. Not compatible with I-Beam type saddles, standard dual rail type only. - Behind-saddle mounted holder for two extra water bottle cages, or one bottle and one spare tube set - Good position for aerodynamics - Lightweight at 135 grams - Bottle cage mounting screws included - Not compatible with I-Beam type saddle. Standard dual rail type only
Minoura SGS-400-OS Clamp
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Polar Bottle Cenote Four Packs
$29.99
Discover freedom with Cenote – the first disposable hydration system with recyclable reservoirs. Durable, but priced for a single use, Cenote makes cleaning optional. So, go ahead use your system however you want, for as long as you want. And when you’re ready, just replace with a fresh Cenote reservoir. - Disposable/ fully recyclable - Fits most backpacks - Premium, high flow 360-degree locking bite valve - Removable cap gasket for easy cleaning - Lightweight and easy to fill - BPA free, and no chemical coatings - Replacement components sold separately - Wide mouth opening is easy to fill, and fits hand-held filtration systems and Polar Bottle caps
evoc CP 35L
$400.00
The EVOC CP 35L is a fully equipped camera backpack for professional sports photographers and videographers. Our pack enables perfect camera protection of sensitive equipment during shoots, even in difficult terrain. - Wide opening back access to the main compartment allows for easy access to your equipment - Avalanche compartment on the front offers storage for a shovel and probe - Attachment system for: snowboard, skis (diagonal/vertical), snowshoes, 2 ice picks, poles, tripod (front/side) - Camera compartment partitioning (individual, padded) - Organizational compartments for CF and SD cards - Notebook pocket 17’’ - Side compartments (left side fits 3L hydration system, not included) - Hip belt w/ pocket (extra-wide, padded, removable, adjustable from 90 - 130 cm) - Back section with ventilation channels (reinforced, padded) - Carrying handle - Base with rubber feet (reinforced) - T-zipper pullers - Rain cover (integrated, removable)
Page 1 of 7 Next page