Tools

The basics of what you need to perform maintenance on TRP and Tektro hydraulic disc brakes. Includes the following: - 1 Syringe - 1 Plastic tubing for syringe/caliper - 1 Plastic tubing for lever/overflow - 1 M5 Silver bleed fitting - 2 M6 Silver bleed fittings - 1 M7 Black bleed fitting

Special tools for building Surly Fat Bike wheels. - 56mm-wide spacer aids in dishing and truing Moonlander offset wheels - 35mm-wide spacer aids in dishing and truing Pugsley offset wheels

- For removing/installing cartridge bearings in SRAM X0 hubs and Roam, Rail and Rise wheels

Rear Shock 31mm Flat Wrench for Vivid Air Reservoir - Crowfoot Compatible

Eyelet Bushing Tool

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

• Removes and installs all RockShox 1/2mm rear shock eyelet bushings and mounting hardware

RockShox 30mm Seal Kit

RockShox Volume Reducer Kits

RockShox XLoc Parts

RockShox XLoc Parts

Works with the following forks: - Pike - Lyrik - SID - Revelation - Reba - Paragon This tool can also be used to remove and install SRAM/Shimano cassettes.

Vivid Air Rear Shock Basic Service Kit - Includes replacement seal, bushing, o-ring, and bottom-out/negative-bumper

Simply Accurate – Maintenance-free, Reliable and Affordable Our torque tools use intelligent design for accuracy without the need for expensive calibration. An industrial-grade internal spring manufactured within extremely tight tolerances pre-determines torque setting. The tool does not need to be set into calibration and cannot shift out of calibration. Bits Included Each Tool includes removable Bit holder and (6) High-quality Nickel-Plated S2 Steel bits. 3NM Bits: H2, H2.5, H3, T10, T20, PH0 4NM Bits: H3, H4, H5, T20, T25, PH1 5NM Bits: H4, H5, H6, T20, T25, PH2. Easy to use Ergonomic handle fits your fingertips and includes a spinner grip to make wrenching easier. Tool provides an unmistakable 20 degree overrun when the torque limit is reached. Users can be confident knowing they have the correct tension. Low profile allows the tool to fit into more places for use, overall 50% lower height than tools costing twice as much. Use it like a tool – safe to un-screw! Prestacycle's TorqKey is fast and easy-to-use as an everyday tool. Color-coded tension markings on both sides make it a quick-grab on your workbench. They provide Torque relief in the right (clockwise) screw tightening direction, and hold firm in the left (counterclockwise) unscrew direction. You can unscrew fittings that were just tightened with the TorqKey. This is very handy when making multiple attempts to get a cable adjustment just right. NOTE: Do not use TorqKey to remove stuck, damaged, rusted or over-tightened fittings. More Options Prestacycle Pro TorqKeys are available in 4Nm, 5Nm, 6Nm, 7Nm, 8Nm, 10Nm and 12Nm. Combine TorqKeys with our Ratchets and Bit sets to make a more complete tool set for Bicycle servicing. Standard Magnetic Hex Tip works with our 20 Piece Bicycle Bits set, our long Bicycle bits and any other 1/4" Hex bits. Prestacycle TorqKeys are different… designed from the start with real-world experience on Bicycles. Specifications: - 3NM included Bits: H2, H2.5, H3, T10, T20, PH0 - 4NM included Bits: H3, H4, H5, T20, T25, PH1 - 5NM included Bits: H4, H5, H6, T20, T25, PH2 - Torque value accurate to + / – 10%. - Provides 20 degree overrun when maximum torque is reached. - Overrun provides user with unmistakable feedback when torque value is reached. - Polymer Finger grip Handle with spinner top ergonomically designed for comfortable use. - Color-coded tension markings on both sides. - Magnetic 1/4" hex bit retention makes bit changes easy. - Torque accuracy life-cycle exceeds 5000 cycles. - Simple to Judge – If the logo is worn, the tool is past life. - Replacing the tool costs less than other tool's calibration service. - Height: 78 mm, 3.1 inches. - Width: 52 mm, 2.1 inches. - Weight: Approx. 48 grams. - 1 Year limited consumer warranty. Disclaimers Check with the manufacturer of your components and fittings for proper torque specifications. Always follow Manufacturer guidelines for installation and removal of nuts, bolts and screws.

Prestaratchet advances the art of wrenching bicycles. Consider the irony of using an Allen or Torx key on your expensive and delicate bike parts. Tools like that come free with un-assembled furniture. Isn’t your bike worthy of better? Prestaratchet is faster, safer, less expensive, longer lasting and more comfortable than any key. Compatible with 1/4" bits.

Simply Accurate – Maintenance-free, Reliable and Affordable Our torque tools use intelligent design for accuracy without the need for expensive calibration. An industrial-grade internal spring manufactured within extremely tight tolerances pre-determines torque setting. The tool does not need to be set into calibration and cannot shift out of calibration. Easy to use Ergonomic handle fits your palm with a four-finger grip to make wrenching easier. Tool provides an unmistakable 20 degree overrun when the torque limit is reached. Users can be confident knowing they have the correct tension. Low profile allows the tool to fit into more places for use, overall 60% lower height than tools costing twice as much. Use it like a tool – safe to un-screw! Prestacycle's TorqKey is fast and easy-to-use as an everyday tool. Color-coded tension markings on both sides make it a quick-grab on your workbench. 50% thicker walls in the bit shaft make our tools stronger and more reliable than others. They provide Torque relief in the right (clockwise) screw tightening direction, and hold firm in the left (counterclockwise) unscrew direction. You can unscrew fittings that were just tightened with the TorqKey. This is very handy when making multiple attempts to get a cable adjustment just right. NOTE: Do not use TorqKey to remove stuck, damaged, rusted or over-tightened fittings. More Options Prestacycle TorqKeys are available in 4Nm, 5Nm, 6Nm, 7Nm, 8Nm, 10Nm and 12Nm. Combine TorqKeys with our Ratchets and Bit sets to make a more complete tool set for Bicycle servicing. Standard Magnetic Hex Tip works with our 20 Piece Bicycle Bits set, our long Bicycle bits and any other 1/4" Hex bits. Prestacycle TorqKeys are different… designed from the start with real-world experience on Bicycles. Specifications: - Torque value accurate to + / – 10%. - Provides 20 degree overrun when maximum torque is reached. - Overrun provides user with unmistakable feedback when torque value is reached. - Polymer T-Handle ergonomically designed for comfortable four-finger & palm grip. - Color-coded tension markings on both sides. - 12mm wide Zinc shaft has 50% thicker walls – stronger than other Torque tools. - Magnetic 1/4" hex bit retention makes bit changes easy. - Torque accuracy life-cycle exceeds 5000 cycles. - Simple to Judge – If the logo is worn, the tool is past life. - Replacing the tool costs less than other tool's calibration service. - Height: 64.5 mm, 2 1/2 inches. - Width: 81 mm, 3.18 inches. - Weight: Approx. 75 grams. - 1 Year limited consumer warranty. Disclaimers Check with the manufacturer of your components and fittings for proper torque specifications. Always follow Manufacturer guidelines for installation and removal of nuts, bolts and screws.

- (18) Precision hardened bits in two Patented Bits Carriers - Professional bits made with hardened S2 steel - Nickel-plated for a long lasting finish that prevents marring - They resist rounded edges to protect your bolts - Compatible with all Prestacycle hex-bit hand tools - Set fits virtually every know bicycle bolt – including JIS! Features Highest quality bits Prestacycle offers the highest possible quality 1/4? hex tool bits for use on Bicycles and much more. Our bits are compatible with all Prestacycle hex-based hand tools, and are industry-standard to fit all other tools that use 1/4? hex bits. Engineered for long life All Prestacycle Professional bits are made with hardened S2 steel, which is much stronger than most hand tools which are made of CRV Steel. S2 steel also resists stretching, preventing rounded edges on the bits that could damage bolts. We apply nickel-plating to all Professional bits to prevent marring to Stainless Steel, Aluminum and Titanium screws and to provide a long-lasting finish. Specific hex bits have micro surfacing to reduce slippage when in use. JIS Compatible Prestacycle bits sets do NOT contain U.S. Philips heads, which were specifically designed in 1932 to round-out as an alternative to torque tools. These are modern ANSI standard (compatible with the discontinued JIS standard) and can be used on any bicycle cross head bolt. (18) Precision hardened S2 steel Nickel-plated Professional bits in a Patented Bits Carrier. Stronger and longer lasting than any other tools made for bicycles. Since worn heads can damage bolts, these bits protect your components. Covers all major HEX sizes, Screwdriver sizes, and all the new TORX® sizes found on the latest components. - (18) Precision hardened bits in two Patented Bits Carriers - Professional bits made with hardened S2 steel - Nickel-plated for a long lasting finish that prevents marring - Resist rounded edges on the bits that could damage bolts - Compatible with all Prestacycle hex-bit hand tools - Industry-standard to fit all other tools that use 1/4? hex bits - Specific hex bits have micro surfacing to reduce slippage when in use

- Precision laser-cut, heat-treated tool steel construction. - Ergonomic design for maximum leverage and comfort. - Compatible with domestic and imported beers. We dug deep to design this essential shop tool. Pulling inspiration for across our innovative tool lineup, you will find this to be the best shop quality bottle opener available. After all, sometimes you need a little inspiration to fix that derailleur that just won't shift right no matter what you try! A must for every tool box or gear bag. Compatible with both domestic and imported beers and the more you use it, the better it works...or at least it seems that way! Backed by Pedro's lifetime warranty.

A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfaces. The Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame, preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal.

- Updated shape features smaller head profile for clearance and longer handle for control. - Superior material and heat treatment outlast the competition. - Precision laser cut design with ergonomic cushioned grip. Pedro's cone wrenches are made from 2mm thick, precision laser cut, heat-treated tool steel and are revered for outlasting many other "shop quality" cones wrenches. Pedro's designed each cone wrench to fit perfectly, protecting the hub and ensuring simple and safe usage for the mechanic. Each flat wrench also features a single-ended design with ergonomic cushioned grip to provide maximum leverage & comfort. The updated shape features a smaller head profile for better clearance and a longer handle for improved leverage and control. Backed by Pedro's lifetime warranty.

Socket Tool for Four-Notch BMX/Single-Speed Freewheels - Made from heat-treated tool steel for the ultimate in strength and lasting performance. - Professional quality, precision sized for the perfect fit. - Fits all four-notch BMX/single-speed freewheels for hubs with 1.37 x 24 TPI threads. - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise. Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. The Freewheel Socket is designed to fit over axles up to 14mm and work seamlessly with Pedro's snap-channel Pro Socket handle, any 24mm socket/wrench, or in a bench vise. Backed by Pedro's lifetime warranty.

- Fits Shimano, Sun Race, Sachs, and other 12 spline, 22.7mm diameter 5–10 speed freewheels and all Campagnolo cassette lockrings and Record, Chorus, Centaur, and Athena bottom brackets. - Professional quality and precision sized for the perfect fit. - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise. Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic.

Add on-tool storage and eight frequently used bits to the Multi-Torque, T-Handle Bit Drive, or Pro Bit Driver. The set includes our new JIS compatible #2PH screwdriver bit and like all Pedro's hex bits, each is made from premium S2 tool steel. - TPR holder designed to fit Multi-Torque, T-Handle Bit Drive, and Pro Bit Driver. - Bits made from premium S2 tool steel to ensure strength and lasting performance. - Includes 2, 2.5, 3, 4, 5, 6mm hex, T25 torx, and JIS compatible #2PH screwdriver bits.

- Investment cast, heat-treated tool steel wrench features 3-side and 4-side openings. - Durable plastic handle reverses to provide ideal ergonomics with both openings. - Precision-cut wrench openings are perfectly sized for fit and speed. The Pro Spoke Wrench takes ergonomics and versatility to the next level. The dual-sided design, with both 3-side and 4-side openings, features a reversible handle. When using either wrench opening, the curved and sculpted plastic handle fits perfectly in your fingers and positions them on either side of the spoke for ideal leverage and control. The wrench is investment cast, heat-treated steel ready for years of service and the precision-cut openings are perfectly sized for fit and speed.

- New improved ergonomic y-style handle design - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication - Designed to stand up to the harsh conditions of professional use Recently named VeloNews Editor's Pick for Best 3-Way Wrench, Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use. The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit size indication for quick tool identification. The torx model Includes T10, T25, and T30 sizes, perfect for the most common torx hardware sizes found on modern bicycles and components, while the hex model includes 4, 5, and 6mm hex sizes, perfect for common hex hardware found on modern bicycles and components. Both are backed by Pedro's lifetime warranty.

Recently named VeloNews Editor's Pick for Best 3-Way Wrench, Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body for strength and long-lasting performance. The ergonomic shape provides excellent leverage and easy handling.

Y-Style Hex Wrench - Perfect for common hex hardware found on modern bicycles and components. - New improved ergonomic Y-style handle design. - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication. - Designed to stand up to the harsh conditions of professional use. - Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use. - The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification. - Backed by Pedro's lifetime warranty.

Having trouble getting at internal nipples? Park's 3-Way Internal Nipple Wrench comes to your rescue. It features a 3.2mm square drive, as well as 5 and 5.5mm hex sockets that slip perfectly into the tight surroundings of most rims. It also utilizes Park's innovative Y-shape design that provides heaps of leverage and comfort.

Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.

Park Tool's versatile and durable 8oz Shop Hammer is a perfectly balanced striking instrument built for a wide variety of shop uses. - Forged steel, precision machined striking face - Non marring, replaceable composite tip - Fiberglass shaft with soft touch grip - 8oz (225g) Head - Length: 12" (30.5cm) - Steel striking face: 1" (25mm) diameter - Plastic face: 1-1/4" (32mm) diameter - Replacement tip: Part #293-8