Wheels

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

Increase the agility of lightweight eMTBs using this specific aluminum wheelset. Aligned to the purpose of lightweight eMTBs, the HX 1700 SPLINE LS aim for the right balance between lightness and resistance for more dynamic handling. The 350 hubs have been redesigned for eMTB to offer more resistance to the acceleration and braking forces. In addition, the spokes have been modified to increase their strength without drastically increasing the weight. These wheels are ready to be ridden on the fastest lines in technical sections and to carve into fast and tight turns. - Built to provide enhanced riding agility for light eMTBs - Agility-focused aluminum rims are light, yet resistant; helping to enable agile riding - New Hybrid-specific spokes for an advanced riding experience, combining resistance and lightweight - Built with the 350 Hybrid LS hub for enhanced reliability and contained weight

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character. - OXiC rim surface technology for improved braking performance and wear - Tubeless Ready rim compatible with standard clincher tires - 240 hub and ProLock Squorx ProHead spokes built with radial lacing - Factory installed tubeless-ready tape - Includes titanium RWS skewer, tubeless valve and Swissstop BXP blue brake pads

A carbon structure optimized for impact resistance, a reinforced flange and the ideal resin-carbon fiber ratio make the EXC 1200 Spline the benchmark in the Enduro sector. The rim's inherent strength allows the use of extremely lightweight Aerocomp and Aerolite spokes and generates optimum wheel stiffness. The heart of this wheel is a 180 Straight Pull hub with smooth-running SINC Ceramic bearings and the newest Ratchet EXP freehub system. - Requirement-specific carbon rims are designed for the ultimate enduro riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - SINC ceramic hub bearings are engineered with optimum bearing clearance for minimum friction - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT ProLock Squorx ProHead aluminum spoke nipples

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance, built on reliable and smooth rolling 350 hubs. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

DT's benchmark setting aero+ rim matched to a mix of top and end spokes and premium hub makes for a wheel that delivers in all conditions. Fitting 28mm tires to it's wide rims will give you all the comfort and grip needed for mixed surface rides. Using 25mm tires will aero-optimize your race bike. - Spline 240S based hub - Straight-pull hub/spokes built with 2-cross pattern - Includes factory installed tubeless tape, tubeless valve and valve guard

Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals. - Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width - Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Disc brakes have arrived in road cycling. They’re proven in mountain and cyclocross, and with the new EC90 SL Disc wheels combined with the latest brake systems, there are no longer any compromises associated with going disc. The EC90 SL takes the proven Fantom rim shape and scales it down to a shallower 38-millimeter depth. The EC90 SL Disc is available in tubular or certified Road Tubeless carbon clincher and are entirely built by hand from start to finish and acoustically tuned. These wheels combine top-end materials, a methodical build and the proven M1 6-bolt disc hubset. Best of all, these wheels are future proof, they can convert to 15x100 & 12x100; parts sold separately.

Find the road less travelled on the new EA70 AX. Joining forces with the EA70 and EC70 AX Bar in our AX adventure road line, the new EA70 AX wheel has the durability to withstand trail riding but is translated to drop bar applications with center lock hubs and 11-speed road compatibility. From bikepacking adventures loaded with gear, to washboarded gravel descents with only your wheels and tires providing the compliance, we have you covered. The welded tubeless ready rim boasts a generous 24mm internal rim width that increased tire volume and gives an optimal tire profile for 35 to 50C tires. It’s the perfect wheel to round out any adventure drop bar build.

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 10T chromoly driver with 3-pawl system. Its designed for BMX 110mm wide frames. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 10T - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 11T chromoly driver with 3-pawl system.It's designed for BMX 110mm wide frames. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 11T - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride. R is for rally. HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos

The EC70 AX wheels connect EC70 carbon rims to our proven X5CL hub with 28 3x double butted Sapim straight pull spokes. End cap and axle components are available for all major industry standards. Wide, 24mm internal rims are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, single track forays and unrelenting gravel races. Our Easton Overland team and SDG Muscle Monster team riders have put these wheels to the test, racing prototypes at DK200, with Amity Rockwell taking the DK Queen title and Amanda Nauman finishing 6th, while at Lost and Found 2019 Michael Van Den Ham came in 4th and Craig Richey took 6th.

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 26-inch x 1 3/8 - ISO Diameter: 590 / 26 x 1 3/8-inch - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

- STW ST1 26.5mm wide alloy rims - KT QR ATB 9mm/100/108 axle - Black or Silver UCP spokes

Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Valve: Schrader - Tire Type: Clincher

Feel your bike come alive on the open road with the new Alpinist CLX II-the lightest, best-handling clincher wheels we have ever made. Hyper-responsive acceleration, magic in the corners, sublime over rough roads, all elevated with the performance of a tubeless system. There's no room for a single excess gram whether you're chasing summits or ride quality because perfection is only achieved when there is nothing left to take away. It takes more than a lightweight rim to deliver the incredible reactivity and handling of the tubeless Alpinist CLX II. The wheelset is designed as a system with our engineers controlling and testing every part of that system-hubs, rims, spokes, lacing-and developing it hand-in-hand with Specialized Tubeless tires. The result is a 1250-gram tubeless wheelset with otherworldly ride quality. The Alpinist CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our all-new LightAF hubs are the spinning heart of the Alpinist CLX II. We carved 50 grams out of the previous Alpinist CLX hub with new low-profile hub bodies and machined rotor mounts. Inside, DT Swiss EXP internals and SINC ceramic bearings deliver silky-smooth efficiency and outstanding durability. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: One-cross/Two-cross (2:1), DS: 288mm NDS: 286mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,265g, Front 670g, Rear 694g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency - Ratchet EXP OS, optimized for the requirements of an eMTB, with a bigger threaded ring for direct acceleration through a torque-resistant freehub system

SMOOTHER IS FASTER Trail riders who prize nimble handling will be blown away by Traverse SL II's category-leading control, strength-to-weight ratio, and pinch-flat resistance. LIGHTER At 1,645 grams, this is our lightest trail wheelset ever. STRONGER Front and Rear Specific Rims with carbon layups optimized for strength and weight boast 15% greater front wheel strength and 25% more rear wheel strength than the previous Traverse SL. CONTROL-BOOSTING VERTICAL COMPLIANCE 21% more vertically compliant than the previous Traverse SL (delivered through Shallow Rim Shape and front/rear specific layup) enables enhanced terrain hugging and bump-force absorbing control. TRACTION MONSTER Carefully engineered rim shape intentionally flexes for improved support and traction to boost confidence and control. TOUGH LIFE, LONG LIFE Engineered rim offset enables balanced spoke tension for improved fatigue life. Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer Chuck Teixeira for inventing the "Roval ThreadBed Valve"; a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, and makes tire set-up easier, and reduces sealant clogs. INTENDED USE Trail WEIGHT (29) 1,645g 240 EXP (with valve and tape) WHEEL SIZES: 29 2 Year "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

- Zipp's most advanced and fastest deep-rim wheel for road, triathlon, and time trialing - More than 300 grams lighter that previous model - Optimized tire bed for easy tire installation - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch V2 technology reduces drag and lowers friction - Center locking rotor interface. Lockring is included with the wheels - Zipp graphics applied using Zipp's ImPress direct-print technology - Minimum 25mm tire width - Lifetime Warranty - Wheel Diameter/ISO: 700C / 622 - Wheel Tire Type: Hookless - Tubeless