Filter By:
- Bar Ends (10)
- BMX (48)
- Bottom Brackets (190)
- Brakes/Levers/Pads (506)
- Cables (159)
- Cassettes/Freewheels (115)
- Chainrings (220)
- Chains (117)
- Show More Categories
- Cranksets (242)
- Derailleurs (168)
- Forks (130)
- Groups (21)
- Handlebar Grips/Tape (233)
- Handlebars (185)
- Headsets (153)
- Pedals (226)
- Saddles (174)
- Seatposts (92)
- Shift/Brake Combinations (70)
- Shifters (129)
- Shocks (27)
- Stems (105)
- Other (1537)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$39.99
The Safari seat is Reed Stark's signature seat that features a woven nylon giraffe print.
- Embroidered BSD patch
- Clamp Style: Pivotal
- Material: Synthetic
$79.99
Alex D’s new signature ALVX bars, a classic BMX shape and only 28" wide, multi-butted chromoly sweetness and available in 3 height options.
$14.95
Cleat screws are intended for proper installation of the Cleat Wedge. Designed to withstand high torque levels, creating a secure and reliable connection between the rider and the bike. Available in different lengths and styles to fit most pedal systems.
- 10mm SPD/MTB compatible cleat screws
- 4mm Hex countersunk M5x0.8
- Compatible with most 2-hole cleats
- Black oxide-coated carbon steel
- 25 pieces
$62.00
The Cleat Screw Kit is a bike fitter's best friend because it eliminates the difficulty (and in some cases impossibility) of finding the perfect type and length of cleat screw.
- The Kit contains 150 screws (15 different screw types/sizes with a quantity of 10 each)
- SPD / MTB Compatible Cleat Screws - 4mm Hex countersunk M5x0.8, compatible with most 2-hole cleats, and are black oxide coated carbon steel. Kit includes 10 of each: 10mm (PD0219), 12mm (PD1576), 14mm (PD1577), and 16mm (PD1578).
- Look / Shimano Compatible Cleat Screws - 4mm Hex Button Head M5x0.8, are compatible with most 3-hole cleats, and made from stainless steel with Nylock®. Kit includes 10 of each: 8mm (PD1579), 10mm (PD1580), 12mm (PD1581), 14mm (PD1582), 16mm (PD1583), 18mm (PD1584), and 20mm (PD1585).
- Speedplay Walkable Compatible Cleat Screws - Phillips Recessed Button Head - M4x0.7, are 4-hole cleat compatible and made from stainless steel with Nylock®. Kit includes 10 of each: 9mm (PD1590), 11mm (PD1591), 13mm (PD1592), and 15mm (PD1593).
$19.99
- Bottom bracket for one-piece crank
- Sealed mechanism
- 24 TPI
- Spindle Type: One piece
- Cup Material: Steel
- Weight: 310-315g
- Cup Type: Press Fit
- Cup OD/Bearing OD: 51mm
$43.99
- One-piece chromoly crankset
- 24TPI
- Length: 175mm
- Weight: 997g
$92.99
- Fits 3-piece 22mm BMX cranks
- 2mm 6061 aluminum core
- Includes adapter for 19mm spindles
- Teeth: 25T
- Chain Compatibility: Singlespeed
- Tooth Type: Standard
$12.99
The Cult 510 HD chain features teflon coating with stamped cult logos, heat-treated riveted pins and thicker side plates to increase strength.
- Includes a pre-installed half link to make fine tuning the length easier.
- Color: Black
- Width: 1/2 x 1/8-inch
- Drivetrain Speeds: Single Speed
- Chain Connection Type: Pressed Pin
$26.99
The Cult half link chain features teflon coating engraved with cult logos and is designed to help dial in the rear end length on frames with short dropouts.
- Rounded side plates are compatible with 8T and larger drivers
- Color: Black
- Width: 1/2 x 1/8 mm
- Drivetrain Speeds: Single Speed
- Chain Connection Type: Pressed Pin
- Half Link Chain: Yes
$64.99
Wider and beefier with and improved clamping area and recessed compression bolt for a clean look.
- Bar Clamp Diameter (mm): 22.2
- Steerer Clamp Diameter: 1-1/8" ins
- Stem Type: Top Load
$144.99 - $169.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design.
- 1-pc machined steerer tube with an integrated bearing race
- Tapered legs
- Tire clearance for 2.40” tires
- Updated top cap retention design
$3.47
Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing
$3.68
Campagnolo small parts for bottom brackets.
$4.10
Campagnolo Upper Bolt and Springs
$8.19
Small screw that adjusts spring tension.
$9.24
Campagnolo front derailleur parts for repairs.
$10.45
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$11.95
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
$15.23
Campagnolo front derailleur parts for repairs.
$22.45
Campagnolo EKAR disc brake adapters.
- Includes bolts
$23.95
Campagnolo EKAR disc brake adapters.
- Includes bolts
$24.26
Campagnolo front derailleur parts for repairs.